>
TÂN LONG
Commercial & Modular Walk-In Cold Rooms

Mini Industrial Cold Room

Engineering and turnkey installation of modular walk-in mini cold rooms (5m³ to 50m³) for restaurants, hotels, convenience supermarkets, and pharmaceutical storage. Fully commissioned in 24 hours, running on single-phase 220V power with whisper-quiet operation.

Mini Industrial Cold Room: Tan Long mini cold rooms installed in 48 hours with high energy efficiency.
Replacing Multiple Bulky Reach-In Freezers: Restaurants operating 5 to 7 domestic reach-in freezers waste valuable kitchen space, radiate intense ambient heat, and triple electrical bills. Tan Long walk-in mini cold rooms deliver 10x the usable storage volume, allowing staff to walk directly inside to organize inventory on ventilated stainless shelving, tracking expiry dates effortlessly while saving 50% on monthly electrical expenses.

3. Modular Walk-In Mini Cold Room vs. Traditional Commercial Reach-Ins

Comparison Parameter Tan Long Modular Walk-In Mini Cold Room Traditional Multi-Door Stainless Reach-In Freezers
Usable Storage Volume 8 m³ to 60 m³, storing 2 to 15 tons of neatly organized inventory on shelving Restricted to 1.0 m³ - 2.5 m³, goods piled haphazardly, difficult to rotate
Actual Power Consumption Single high-efficiency 2 to 5 HP unit, saving 35% power with 100mm PU panels Multiple small reach-in compressors running non-stop, doubling power draw
Temperature Regulation & Stability Even, stable climate throughout (±0.5°C), zero thermal shock during traffic Severe temperature swings on opening, bottom accumulating dirty defrost water
Equipment Lifespan 15 - 20 years lifespan, panels 100% reusable and relocatable 5 - 7 years; cabinet sheet rusts and reach-in compressors degrade rapidly
Capex per m³ Usable Volume Just 4.5 to 7.5 million VND per m³ of usable refrigerated volume Up to 18 to 25 million VND per m³ of usable storage volume

4. Temperature Standards for Commodities in Mini Walk-In Cold Rooms

Bố trí giá kệ bên trong kho lạnh mini thông thoáng
Ventilated stainless steel shelving allows gentle laminar air circulation throughout the walk-in chamber

Tan Long configures optimal temperature bands per business inventory requirement:

  • Fresh Cut Flowers & Da Lat Organic Produce: Temperature +4°C to +8°C, 90-95% RH, gentle air circulation preventing petal burn and stem desiccation.
  • Imported Fresh Fruit (Apples, Grapes, Cherries): Temperature 0°C to +2°C, integrated with polar-grade PVC strip curtains preventing thermal loss.
  • Fresh Meat & Pasteurized Dairy Storage: Temperature -2°C to +2°C, holding fresh meat pristine for 5 to 7 days without discoloration.
  • Frozen Foods, Ice Cream & Seafood Freezer: Temperature -18°C to -22°C, equipped with automated electric defrost evaporators.
  • MOH GSP Vaccines & Pharmaceuticals: Temperature +2°C to +8°C, featuring 100% backup compressor redundancy and automated data logging.

5. Monoblock vs. Split Refrigeration Unit Selection Guide

Monoblock Plug-In Units (Wall / Ceiling Mounted)

Ideal for ventilated backyards or open warehouse areas. Rapid 2-hour plug-and-play installation with pre-charged factory refrigerant, zero on-site brazing required. Consideration: Rejects heat and compressor noise into adjacent space.

Split Systems (Remote Outdoor Condenser)

Optimal for indoor restaurant kitchens and commercial premises. The remote condensing unit sits outdoors on a rooftop or balcony, eliminating indoor compressor noise and heat discharge.

1. Key Advantages of Tan Long Walk-In Mini Cold Rooms

Lắp đặt kho lạnh mini gia đình nhà hàng siêu tiết kiệm điện Tan Long
Camlock modular walk-in cold room assembled in 24 hours for restaurants, hotels, and supermarkets
  • Standard Single-Phase 220V Power Operation: Operates seamlessly on standard residential 220V power without requiring costly 3-phase commercial electrical upgrades.
  • Ultra-Quiet Genuine Imported Condensing Units: Utilizing hermetic Danfoss, Tecumseh (France), or Embraco (Slovakia) condensing units operating whisper-quiet below 50 dB.
  • Camlock Modular Panel Construction: Rapid 1-day assembly using high-density 100mm PU panels with pre-molded Camlocks. When lease terms expire, operators can dismantle the entire cold room and relocate within 4 hours.
  • Self-Closing Sanitary Cold Room Doors: SUS304 hinged door with heated gasket preventing condensation and internal safety release latch.

2. Walk-In Mini Cold Room Price Matrix 2026

Dimensions (L x W x H) Volume (m³) Chilled (+2°C to +8°C) Frozen (-18°C to -20°C)
2.0 x 1.5 x 2.2 m 6.6 m³ 42.000.000 VND 49.000.000 VND
2.5 x 2.0 x 2.2 m 11.0 m³ 53.000.000 VND 62.000.000 VND
3.0 x 2.5 x 2.5 m 18.7 m³ 68.000.000 VND 79.000.000 VND
4.0 x 3.0 x 2.5 m 30.0 m³ 88.000.000 VND 105.000.000 VND

(Turnkey package includes: 100mm PU panels, condensing unit, digital automated control panel, waterproof LED lighting, stainless hinged door, and complete on-site installation labor).

In-Depth Technical FAQs on Modular Mini Cold Rooms

1. How much electricity does a walk-in mini cold room consume per month?

For a 10m³ walk-in freezer (-18°C) powered by an efficient 2 HP unit, duty cycles average only 10 to 12 running hours daily thanks to high-density 100mm PU insulation. Average daily power consumption is just 15 to 18 kWh (~900,000 to 1,200,000 VND/month), far cheaper than running 4 independent reach-in freezers continuously.

TECHNICAL EXPERT VERIFICATION

Updated: September 2026 • Standards: TCVN 6739 & QCVN 06:2022
Eng. Nguyen Van Long - EPC Technical Director
EXPERT AUTHOR

Eng. Nguyen Van Long

EPC Technical Director & Head of Refrigeration Solutions, Tan Long

20+ years EPC experience in industrial cold storage systems, IQF quick freezers, and automated ASRS facilities. Thermal Engineering alumnus from HCMC University of Technology, VISRAE Executive Board member.

M.Sc. Tran Dinh Hung - Pressure Safety Lead, Tan Long
TECHNICAL VERIFICATION

M.Sc. Tran Dinh Hung

Pressure Vessel Safety Verification & Energy Auditing Lead

15+ years leading NH3 piping pressure safety proofing, COP energy audits, and fire protection certification for PIR/PU panel enclosures under QCVN 06:2022/BXD.